Patch Panels Feed-Through Cat6

The Feed-ThroughCAT6 Patch Panels provide patching without punching down the wires to the ports. They make connecting cables easy: just snap your patch cables' connectors into the panel's shielded or unshielded RJ-45 ports. The panels are ideal for use in relay racks or communications cabinets.
Models are available with 24 or 48 shielded or unshielded connectors.

Construction — Steel
Shielding — JPM814A, JPM816A: (24) or (48) shielded RJ-45 ports
Wiring — Straight-through
Connectors — (24) or (48) RJ-45
Size — With cable management bar(s) installed: 48.3W x 11.4D cm;
JPM814A, JPM818A: 4.4 cm (1U);
JPM816A, JPM820A: 8.9 cm (2U)
Weight — With cable management bar installed:
JPM814A: 1 kg;
JPM816A: 1.9 kg;
JPM818A: 0.9 kg;
JPM820A: 1.4 kg

(1) patch panel
(1) or (2) cable management bars (1 for JPM814A and JPM818A, 2 for JPM816A and JPM820A)
(4) 10-32 cuphead screws
(4) 12-24 cuphead screws
(1) drain wire (JPM814A and JPM816A only)
(1) user manual

NOTE(s):This product works with:
GigaTrue CAT6 Component 550-MHz Patch Cable
Molded Boots (EVNSL670 series)
GigaTrue CAT6 Channel 550-MHz Patch Cable
Snagless Boots (EVNSL640 series)
GigaTrue CAT6 Channel 550-MHz Patch Cable
Basic Connectors (EVNSL620 series)