Convertidor 2W RS232-485

Tired of trying to figure out how to configure DCE equipment? Our Async RS-232↔2-Wire RS-485 Interface Converter is ready to go right out of the box-no configuration is necessary. In minutes, your data will fly between RS-232 and RS-485 interfaces at speeds up to a zippy 115.2 kbps!
The Async RS-232↔2-Wire RS-485 Interface Converter provides big-time performance in a small package. It derives its power from RS-232 data and control signals, so no batteries or clunky AC power adapters are required.
Transmit and receive data are passed in each direction. You get async, point-to-point operation for your 2-wire, half-duplex applications. Connector options include DB25 female connectors matched with either an RJ-45 connector or a terminal block with built-in strain relief. Get the distance you need, too.
The Async RS-232↔2-Wire RS-485 Interface Converter has a range of up to 1 200 m. Once installed, the converter operates transparently as if there were a standard cable connection. All data signals from the RS-232 and RS-485 interfaces are passed straight through.

Distance (Maximum) — 1219.2 m
Operation — 2-wire, RS-485, half-duplex, point-to-point
Protocol — Async
Speed (Maximum) — 115.2 kbps
Transmitter Control — Data
Connectors — (1) 5-screw terminal block, (1) DB25 F
Power — From the RS-232 interface
Size — 1.8H x 5.3W x 8.4D cm;