RS-232 Modem Splitter Rackmount Chassis

With this system, you can avoid the cost of having to purchase and install multiple modems and multiple modem lines.

Plus, it's easy to set up and use. There are no user-configurable switches, jumpers, or settings on the modem splitter. Simply connect the modem and terminal (DTE) devices to it, then power up your modem and terminals as normal.

Approvals — CE, RoHS2
Connectors —
(1) single-style RJ-45 connector: MASTER;
(1) quad-style RJ-45 connector: PORT 1-4; 5-, 6-, and 7-port models have the additional “Port n” connectors on the rear of the card
Environmental —
Temperature: Operating: 0 to 70° C (32 to 158° F);
Storage: -20 to 85° C (-4 to 185° F);
Humidity: up to 95% non-condensing
Interface — RS-232
Leads Supported —
Pins 3,4,5,7, and 8 connected straight through between the MASTER and PORT 1-n.
Pins 1, 2, and 6 “diode ORed” from PORT 1-n to the MASTER port
MTBF — >100,000 hours
Power — Non-powered; no power supply required
Dimensions — 2U, 8.8H x 48.3W x 5.7D cm (3.47”H x 19”W x 2.25”D)
Weight — 2.3 kg (5.0 lb.) chassis plus 16 modem splitter cards installed