Sensor de movimiento Inteligente

For use with AlertWerks II sensor hubs as part of the AlertWerks II environmental monitoring system.

The Security Contact (Magnetic Door Contact
is an open/closed contact switch that indicates Alarm or Normal. A disconnect alarm alerts you when doors to secure areas have been opened. The contact switch can be used in a series with multiple sensors sharing a single port.

The Motion Detection Sensor
detects motion in a 60° angle within maximum distance of 3 m. Connect up to 10 motion detectors on a single sensor port.

The Airflow Sensor
provides an On/Off alarm signal for airflow. Two LEDs indicate the status of airflow and that the sensor is properly plugged into the ServSensor.

Airflow sensor

Connections Output — (1) RJ-45 M with 1.5 m cable
Engine
Sensor type — thermistor
Measurement range — 0 — 100%
Measurement rate — one reading / s
Max. cable length — 30 m
Management Indicators — (1) host connection, (1) status LED
Size — 6.5 x 6 x 3.5 cm
Power — powered by ServSensor, no external power supply required

Security sensor

Connections Output — (1) RJ-45 M with 4.5 m / 18.0 m / 30.4 m UTP cable
Engine
Sensor type — magnetic contact
Measurement range — open / closed
Measurement rate — one reading / s
Max. cable length — 300 m
Power — powered by ServSensor, no external power supply required

Motion detector

Connections — Output — (1) RJ-45 F; Cascade — (1) RJ-45 F
Engine
Sensor type — Passive Infrared (PIR)
Detection speed — 0.3 — 3 Hz
[b]Sensitivity — 3 m
Detection angle — 60°
Mounting height — 1.8 — 3 m
Measurement rate — one reading / s
Max. cable length — 300 m
Management Indicators — (1) power, (1) alarm LED
Size — 8 x 6 x 3.6 cm
Operating temperature — -20 °C to 50 °C
Power — powered by ServSensor, no external power supply required